How To Program Ge Dryer Board
How To Program Ge Dryer Board. • do not dry anything that has ever had anything Wear work gloves to protect your hands.
Ge main control board kit wd21x22276. Just check all of the wires on the inside of the control panel and if it doesn't work you will need to contact the part supplier. A $130 repair for a $2 button.
Raise The Lid At Least 2 Inches And Make Sure It Closes Each Time.
Position the new control board on the support bracket and push it into the mounting slots. Unplug the dryer before installing this part. Slide the electronic control board to release it from the support bracket slots.
Electronic Control Board We04X29099 Manages The Functions Of The Dryer Such As Drying Time And Temperature.
The main control board is two electronic boards connected together by a wire spline and mounted in a plastic housing. Pull the wire harness plug from the connection receptacle on the electronic control board. On my model you program the model, there are both instructions and a model reference chart taped behind the front panel that should walk you through it.
Begin With The Dryer In Idle Mode (All Leds On Display Off).
Ge main control board kit wd21x22276. Ge washers seem to have problems with start buttons. Repair your ge dryer circuit board & timer for less.
Lock It Into Place So It Lines Up The Mounting Screw Hole.
Ownership and support information for gtd65ebsjws | ge® 7.4 cu. Step 2 press the following key sequence to enter service mode: I click on start and it gave me 0 1 2 not sure what that was at that time i selected 2 and press start.
The Control Board Is The Central Control For All Of Your Ge Washer’s Functions.
Just check all of the wires on the inside of the control panel and if it doesn't work you will need to contact the part supplier. The switches, dials, and knobs all connect to the control board. Using the dryer getting started to reduce the risk of fire, electric shock, or injury to persons, read the important safety information before operating this appliance.
Post a Comment for "How To Program Ge Dryer Board"