How Do You Test A Refrigerator Control Board

How Do You Test A Refrigerator Control Board. Locate the control board cover—depending on the model, it could be on the back of the refrigerator, or inside the refrigerator on a side wall or the ceiling. Locate pin 15 on 16 pin connector (p1).

Maytag Refrigerator Troubleshooting DIY Appliance from howtofixit.net

To confirm an electronic control board failure, you’ll need to turn on the compressor and evaporator fan in the diagnostic test mode. It is fairly easy to replace. If the ice level control board fails, the ice maker will stop making ice.

Source: www.genericvan.life

To confirm an electronic control board failure, you’ll need to turn on the compressor and evaporator fan in the diagnostic test mode. Try resetting the control panel by turning off power to the refrigerator briefly.

Source: howtofixit.net

Unplug the refrigerator or turn it off at the circuit breaker for 30 seconds to reset the control. (it will run off of 9v but if you see 9v there is something wrong with the board).

Source: partsdr.com

A bad evaporator fan or failed compressor can mimic a thermistor problem. Once the freezer is cooled down, unplug the refrigerator and ohm from pink to brown.

Source: blog.fixyourboard.com

You will need to order and replace this part number wr60x26866. Once the freezer is cooled down, unplug the refrigerator and ohm from pink to brown.

Source: www.motorhome.com

To check the heater unplug the p1 connector from the control board and ohm from the brown wire on the test plug to the white wire on the on the p1 connector. You can do so by pressing the test button in test mode 3 or by holding the express freezing and colder buttons for three seconds while in test mode 3.

Source: 100refrigerator.com

Locate the control board cover—depending on the model, it could be on the back of the refrigerator, or inside the refrigerator on a side wall or the ceiling. Within the refrigerator diagnostic test mode there are 6 diagnostic tests:

I Think You Should Be Able To Do The Last Step And Exit.

Also know, do lg refrigerators have a reset button? If it rattles it is bad and if not you can be reasonably sure it is not bad. Whirlpool refrigerator control board w10310240a.maytag/ whirlpool control boards are a common problem in these fridges.

Click To See Full Answer Also To Know Is, Where Is The Reset Button On A Refrigerator?

If the start relay isn’t bad, remove the motherboard and look on the backside of the board. The control board is busted when the. To check the heater unplug the p1 connector from the control board and ohm from the brown wire on the test plug to the white wire on the on the p1 connector.

A Bad Evaporator Fan Or Failed Compressor Can Mimic A Thermistor Problem.

Turn the refrigerator and freezer controls to off and 0 inside the refrigerator. If you have a digital voltmeter make sure it’s at hand and have the cover off the appliance to facilitate getting at your control board. Purchase a ge appliance part online.

Monday Through Friday, Pacific Time.

Try resetting the control panel by turning off power to the refrigerator briefly. It is fairly easy to replace. You can order it from reliableparts.com repairclinic.com searspartsdirect.com partselect.com

Check The Back Of The Refrigerator For Its Power Cord.

Unplug the refrigerator and remove the start relay and shake it. How do i reset a refrigerator thermostat? Copy and paste this link it will look different but it comes apart the same way.