Whitfield Pellet Stove Control Board Troubleshooting
Whitfield Pellet Stove Control Board Troubleshooting. Whitfield technical service & troubleshooting manuals available now! The board is bad and needs to be repaired or replaced if you plug in the stove and the lights on the board blink off and on.
The service guy is telling me that the control board is bad even though all the lights and the power light still works. The burnpot is full of unburned pellets, or 3. Wiring diagram page 35 page troubleshooting profile 20 pellet stove safety model note.
Whitfield Pellet Stove Operation, Repair And Information.
The board is bad and needs to be repaired or replaced if you have a lazy flame, low heat, black glass and you have already cleaned the stove and chimney and replaced the photo eye. My new email address is pcboardrepair@gmail.comstop wasting your money and send it to the expert for repair.quick turnaround. Almost all cases of get smoke back into the house are due to leaks in the exhaust system (chimney) and these can be a bit tricky to find because you can smell them but not see them.
Whitfield Technical Service & Troubleshooting Manuals Available Now!
We have custom engineered each of our replacement boards and manufacturing of each board is made in the usa in our own plant. Fits the following whitfield pellet stove models: As long as your stove is listed, it is the correct one even if it looks a little different.
It Doesn't Seem Right To Me.
13 long years of just adding to the same page ! Instructions for whitfield advantage control board (12155912) 12055902 troubleshooting the white connector by the fuse in your old board was a 120/230 vac power select option that was done away with and now is only 120vac so the plug that would have connected to it. Whitfield operating instructions (short version).
This Is What You Do To Find Where The Smoke Is Coming From.
To speed up processing of the board repair, include a description of the problem and any blinking lights in the order note field or tell us when you call for the phone order. In this article we will use the term control panel for simplicity. When we receive your board we put it on our test station to see what problem it has, provide the repair along with replacing and switches, dials and other parts that may be failing so when you get it back it should last a very long time.
It Is A Newer Version Than The Panel That Was On Some Of The Older Stoves.
Whitfield profile 20 fs installation and operation manual. Whitfield pellet stoves can be a headache, especially if you are using them after quite a while. Whitfield pellet stoves use a pressure switch to sense if there is sufficient combustion air flow.
Post a Comment for "Whitfield Pellet Stove Control Board Troubleshooting"