Whirlpool Dishwasher Control Panel Repair
Whirlpool Dishwasher Control Panel Repair. Twist the current control board to fit in. Control panel (part number 8274733 ) for whirlpool dishwashers.
Unplug the dishwasher from the power reservoir. Check and/or replace the keypad if the control responds ok. Control panel (part number 8274733 ) for whirlpool dishwashers.
Place The Board Facing Down.
Disconnect the connectors that go to the heating element. Unplug the dishwasher or shut off the house circuit breaker before installing this part. How do i reset my dishwasher control panel?
Do Not Close The Dishwasher Door.
Unplug the dishwasher from the power reservoir. Connect wires to the updated control panel. Buy a proper control panel for the dishwasher.
Wait For One Minute, Then Plug It Back In Again, To Reset The Dishwasher Control Panel.
The control panel was already loose; You can do a resistance check on the control panel in your dishwasher using a volt/ohm meter with precision needle probes to determine whether the control panel keys work properly. Plug in dishwasher or reconnect power.
First I Would Try Removing Power From The Unit For A Couple Minutes To See If The Control Board Will Reset.
I took the lock mechanism off the panel, and then removed the electric bundle panel from the control panel; Rotate the control board from its initial position on the doorway panel. Electronic control *thermal fuse is not included.
Control Panel 8274733 Contains The Selection Buttons And Display For The Dishwasher.
Turned off the power at the breaker; I clipped the wires to the new cicuit board, replaced it in. Repair or check = replace the electronic control panel if a key does not work.
Post a Comment for "Whirlpool Dishwasher Control Panel Repair"